<

Alberta & BC Rockies Airports: Cranbrook (YXC)



Calgary International Airport as seen from main runway The closest international airport for the Rockies is Calgary International Airport, or "YYC" (its international aeronautical designation). This airport is about 100 km east of Banff & Canmore, about an hour's drive. If you are heading into BC's Rockies, Calgary is about 2-1/3 hours from Radium, Invermere, Fairmont or Golden. If you are heading further south, to Kimberley, Cranbrook or Fernie, you should consider flying into Cranbrook (see below) Edmonton's international airport (YEG) is about 4 hours from Jasper.

Cranbrook-Kimberley Aiport (YXC)

From either airport you can catch a plane to Cranbrook, which is the best service for Kimberley, Cranbrook or Fernie. This airport is located off Highway 95A (at 9370 Airport Access Road), 15 km from Cranbrook and 20 km from Kimberley. Regional airlines with connections to major cities fly in/out of this site, and there is a customs unit. Car rentals are available. (250 426-7913). Arrivals & Departures link.

Cranbrook airport is serviced by:

  • Pacific Coastal Airlines Ltd: 250-489-5542 and toll-free 800-663-2872
  • Air Canada - Jazz: 250-426-7719 and toll-free 888-247-2262
  • Kootenay Airways: 250-426-3762

Taxi to Cranbrook and Kimberley is approximately $25-$27 one way, and ground shuttle is about $11. The airport has car rental desks for Budget, Avis and National.

Links
  • Airlines (list)
  • Flying times
  • Taxi
  • Public transit
  • Shuttle bus
  • Rent-a-car
  • Attractions
  • Hotels & Accommodation
  • Banff & the Rockies
  • Cranbrook Airport Weather
  • Fairmont, BC

    Fairmont has a small aiport for private planes, adjacent to the highway, across from the resort, a 2,000 m (6,200 ft) airport (CYCZ) welcomes private and charter aircraft up to the Boeing 737. (Airport direct: 250-345-2121)

    Local Search & Free Listing
     
    Translate:
    Popular Links:  Click to expand this menu

    Transportation Search:  

    Transportation Search Form...